[P33] Alarm Out Menu 2 - Mitsubishi Electric Evolution+ s-MEXT Technical Manual

2.5.24

[P33] Alarm out Menu 2

Accessible from: "User" group.
Mask of the terminal
Alarm out
2
 
Alarm out addressing 2
No Alarm out 2
Parameters Available
Alarm out addressing 2
--------------- P33.15
(151-154) Any Fan -
Offline Alarm:
--------------- P33.16
(156-159) Any Fan -
Phase Fault:
Alarm out addressing 2
--------------- P33.17
(161-164) Any Fan -
Motor Blocked:
--------------- P33.18
(166-169) Any Fan -
Voltage Problem:
Alarm out addressing 2
--------------- P33.19
(171-174) Any Fan -
Heat Problem:
Alarm out addressing 2
--------------- P33.20
(176-179) Any Fan -
Generic Alarm:
Alarm out addressing 2
--------------- P33.50
(103) Air flow loss
evaporator from fan
alarm output:
Alarm out addressing 2
--------------- ------
--------------- P33.52
(119) Temperature reg.
out of range out:
Version 38
Access mask to "Alarm out 2" menu (Addressing of alarms on the digital outputs).
Mask displayed when none of the parameters of this menu for the unit are available.
Addressing of the fans offline alarms on digital output.
A
Addressing of the fans phase sequence alarms on digital output.
A
Visible only on units with EC fans controlled via serial communication.
Addressing of the fan motor blocked alarms on digital output.
A
Addressing of the fans voltage problem alarms on digital output.
A
Visible only on units with EC fans controlled via serial communication.
Addressing of the fans thermal problem alarms on digital output.
A
Visible only on units with EC fans controlled via serial communication.
Addressing of the fans generic alarms on digital output.
A
Visible only on units with ec fans controlled via serial communication or on units on
which the forced nominal speed on fan alarm function is enabled.
Addressing of the Air Flow alarm due to fan fault on digital output.
A
Addressing of the adjustment temperature probe alarm on digital output.
A
Description Par.N.
33.15
33.16
33.17
33.18
33.19
33.20
33.50
33.52
87