Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 200

UNIT 2
StandBy units: 2
MA S TER
UNIT 10
UNIT 2
StandBy units: 2
MA S TER
UNIT 10
UNIT 2
StandBy units: 2
MA S TER
UNIT 10
The parameters for enabling and configuring the Stand-by function are under the "LAN" menu, which can be accessed by
entering the "Service" password.
For the default values, see the parameters table.
INFORMATION:
This mask is displayed on all units in the same group.
Version 38
UNIT 3 UNIT 4
UNIT 5
LAN
Stand-BY
UNIT 7
UNIT 9 UNIT 8
!
UNIT 4
UNIT 3
UNIT 5
LAN
Stand-By
UNIT 7
UNIT 9 UNIT 8
!
UNIT 3 UNIT 4
UNIT 5
LAN
Stand-By
!
UNIT 7
UNIT 9 UNIT 8
Figure 17-3: chart showing use of the standby function.
U1 = On U2 = On
U6 = U7 = On
STDBY
UNIT 6
U1 = On U2 = On
U6 = U7 = On
STDBY
UNIT 6
U1 = On U2 = On
U6 = On U7 = Fail U8 = On
UNIT 6
!
Unit Status
U3 = On U4 = On U5 =
STDBY
U8 = On U9 = On U10 = On
Unit Status
U3 = On U4 = Fail U5 = On
!
U8 = On U9 = On U10 = On
Unit Status
U3 = On U4 = Fail U5 = On
! !
U9 = On U10 = On
200