Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 59

Mask of the terminal
FC – FC damper
--------------- P21.17
Humid. Diff to deact.
damper: 01.0%RH
FC – FC damper
--------------- P21.18
Enable damper
management during
compressor alarm or
water flow alarm:
FC – FC damper
Damper during comp.
or water flow alarm
--------------- P21.19
Setpoint: 01.0°C
--------------- P21.20
Differential: 00.5°C
FC
--------------- P21.22
Extraction Fan control
enable:
Version 38
Description
Parameter for setting the humidity hysteresis for inhibition of direct Free Cooling.
Visible only if direct free-cooling inhibition for high humidity is enabled.
Enable the management of the Direct Free Cooling damper during compressor or
water flow alarm.
N
– T
Setpoint (T
RETURN EXTERNAL
during compressor or water flow alarm.
Differential for deactivation of the Direct Free Cooling damper during compressor
or water flow alarm.
Enable the control of an extraction fan.
N
Visible only if Direct Free Cooling is available.
) for activation of the Direct Free Cooling damper
Par.N.
21.17
21.18
21.19
21.20
21.22
59