Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 198

The Dehumidification and Humidification setting parameters are under the "Set Point" menu.
The Hot and Cold differential parameters are under the "Regulations" menu, which can be accessed by entering the "Service"
password.
For the default values, see the parameters table.
Stand-by unit OFF
Stand-by unit ON
Stand-by unit OFF
Version 38
P50.05
Differential
Figure 17-2: graph of backup unit activation for exceeding cooling setpoint.
Differential
Figure 17-3: graph of backup unit activation for exceeding heating setpoint.
P50.07
Differential
Figure 17-4: graph of backup unit activation for exceeding dehumidify setpoint.
P20.18
Stand-by unit OFF
P50.06
P20.19
P20.20
Stand-by unit ON
T (°C)
ambient
T (°C)
ambient
Stand-by unit ON
HR (%)
ambient
198