9.2.6
Periodic drain
It is recommended that this function is enabled through parameter P27.16 when using water rich in substances such as humus
and slit. The humidifier drains and automatically replaces the water in the cylinder to prevent the accumulation of these
substances.
The function requires the humidifier to drain and replace the water in the cylinder after 24h (P27.17) of continuous operation
(continuous production of steam).
The parameters for enabling and configuring the function are in the "Optional" menu, which can be accessed by entering the
"Service" password.
9.2.7
Drain due to inactivity
When the function is enabled, using parameter P27.18, the humidifier drains all the water in the cylinder after 3 days (P27.19)
of inactivity (not producing steam) to avoid stagnation and hygiene risks.
The parameters for enabling and configuring the function are in the "Optional" menu, which can be accessed by entering the
"Service" password.
Version 38
155