[P32] Scheduler Menu; [P--] Info Menu - Mitsubishi Electric Evolution+ s-MEXT Technical Manual

2.5.22

[P32] Scheduler Menu

Accessible from: "User" group.
Mask of the terminal
Scheduler
 
Scheduler
--------------- P32.01
Scheduler enable:
2.5.23

[P--] Info Menu

Accessible from: "User" group.
Mask of the terminal
Info
 
Info – Pwd change
Insert a new
User password:
0000
Info – About
Evolution+
Code ME 38.00 EN
HW pCO5+ S
NAND 50MB
Flash 2MB + 7MB + 4MB
Ram 2048KB
Boot 05.01 Bios 06.52
Info
Select language:
ENGLISH
Select language
Info
Reset to default value
KIPlink Supervisor
ReadOnly password:
Version 38
Access mask to the "Scheduler" menu (Time bands manager).
Enable the time bands.
N
Access mask to "Info" menu (Information).
Sets a new "User" password.
Attention: the value set in this field is the one and only to access the "User" group.
This mask contains the reference information of the software [Code ME 38.00 EN].
The closed padlock symbol shows that the board is provided with its proprietary
software.
The hardware information is also shown, namely the size (S, M, L), the memories
(NAND, Flash and RAM), and finally the versions of the basic software of the
controller (Boot and Bios).
Allows you to select the language of the interface.
Resets the password for read-only use of the KIPlink.
N
Description
Description
Par.N.
32.01
Par.N.
86