Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 23

Mask of the terminal
PAC-IF013B-Client
Active step: 11
Mode: COOLING
Status: Online
PAC-IF013B-E Server1
Active step: 11
Mode: COOLING
Status: Online
SAFETY REDUCTION LOAD
NORMAL WORK
Direct FreeCooling
DeltaT 02.0
T.Int T.Ext
25.0 23.0
Status: Enabled
Pos.:All Internal 000%
Constant FlowRate Reg.
Target
02500m3/h
Current
02500m3/h
Status
On Target
Constant DeltaP Regul.
Target
0010Pa
Current
0010Pa
Status
On Target
.DeltaP .
Current
0010Pa
Version 38
Client PAC-IF013B-E status
Pressing [ENTER] will take to the section containing additional Client PAC-IF card
information
icon will flash showing the "PAC-IF code:" message followed by
In case of alarm, the
the alarm code from the PAC-IF card. For additional information on the meaning of the
code, see the "Event Mask" chapter.
Information visible only with S-MEXT units.
Server 1 PAC-IF013B-E status
Pressing [ENTER] will take to the section containing additional Server 1 PAC-IF card
information
icon will flash showing the "PAC-IF code:" message followed by
In case of alarm, the
the alarm code from the PAC-IF card. For additional information on the meaning of the
code, see the "Event Mask" chapter.
Information visible only with S-MEXT unit and Server 1 enabled.
Mask that displays the status of the Safety Reduction Load function for units with s-MEXT
For more information see the "Safety Reduction Load Mask" section.
Display of operation of the Direct Free Cooling function.
Displayed:
•
Internal T, external T and Enabling of direct Free Cooling.
•
Damper position (internal only, mixing, external only) and the opening percentage.
The image graphically describes the Free Cooling damper position:
•
Damper in internal air only position.
•
Damper in the internal and external air mixing position.
•
Damper in external air only position.
Visible only if the function is enabled
Display of operation of the Constant Capacity function.
Visible only if the function is enabled.
Display of operation of the Constant Head function.
Visible only if the function is enabled.
DeltaP value display only.
Visible only if the function is enabled.
Description
23