Table of Contents
Advertisement
Mask of the terminal
Adjustments
--------------- P24.44
Remote 4 T+H temp.
probe adj.:
0.0°C
--------------- P24.45
Remote 4 T+H humidity
probe adj.:
00.0%
Adjustments
--------------- P24.23
Return T+H tem. Probe
updating diff.:
0.1°C
--------------- P24.24
Return T+H tem. Probe
updating diff.:
0.1%
Adjustments
--------------- P24.50
Supply T+H tem. Probe
updating diff.:
0.5°C
--------------- P24.51
Supply T+H hum. Probe
updating diff.:
0.5%
Adjustments
--------------- P24.25
Remote1 T+H tem. Probe
updating diff.:
0.1°C
--------------- P24.26
Remote1 T+H hum. Probe
updating diff.:
0.1%
Adjustments
--------------- P24.27
Remote2 T+H tem. Probe
updating diff.:
0.5°C
--------------- P24.28
Remote2 T+H hum. Probe
updating diff.:
0.5%
Adjustments
--------------- P24.29
Remote3 T+H tem. Probe
updating diff.:
0.5°C
--------------- P24.30
Remote3 T+H hum. Probe
updating diff.:
0.5%
Adjustments
--------------- P24.31
Remote4 T+H tem. Probe
updating diff.:
0.5°C
--------------- P24.32
Remote4 T+H hum. Probe
updating diff.:
0.5%
Adjustments
--------------- P24.33
TH air temperature
probe adj.:
0.0°C
--------------- -----
---------------------
Adjustments
--------------- P24.46
External T+H air temp.
probe
adj.:
0.0°C
--------------- P24.47
External T+H Humidity
probe
adj.:
0.0%
Version 38
Parameter for calibrating the remote temperature / humidity sensor 4.
Visible only if at least four serial remote T+H probes are configured.
Parameter for setting the air return temperature reading resolution.
Parameter for setting the air return humidity reading resolution.
Visible only if the air return serial T/H probe is enabled.
Parameter for setting the air delivery temperature reading resolution.
Parameter for setting the air delivery humidity reading resolution.
Visible only if the air delivery serial T/H probe is enabled
Parameter for setting the remote air 1 temperature reading resolution.
Parameter for setting the remote air 1 humidity reading resolution.
Visible only if at least one serial remote T/H probe is configured.
Parameter for setting the remote air 2 temperature reading resolution.
Parameter for setting the remote air 2 humidity reading resolution.
Visible only if at least two serial remote T/H probes are configured.
Parameter for setting the remote air 3 temperature reading resolution
Parameter for setting the remote air 3 humidity reading resolution.
Visible only if at least three serial remote T/H probes are configured.
Parameter for setting the remote air 4 temperature reading resolution.
Parameter for setting the remote air 4 humidity reading resolution.
Visible only if at least four serial remote T/H probes are configured.
Parameter for generic serial T/H probe air temperature sensor calibration.
Visible only if the generic serial T/H probe is enabled.
Parameter for the calibration of the NTC 2 return air temperature probe.
Visible only if at least two air return NTC probes are configured.
Parameter for calibrating the external temperature / humidity sensor.
Visible only if the external serial T/H probe is enabled.
Description
Par.N.
24.44
24.45
24.23
24.24
24.50
24.51
24.25
24.26
24.27
24.28
24.29
24.30
24.31
24.32
24.33
24.46
24.47
69
Advertisement
Table of Contents
