Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 29

Mask of the terminal
Unit - Energy Anlz. 1
Energy: 0075600kWh
Time: 0000002h
Unit - Energy Anlz. 2
Voltage (V) 231
Current (A) 017.9
Active Power(kW)0003.7
Unit - Energy Anlz. 2
Voltage (V)
L1-L2 403
L2-L3 403
L3-L1 403
Neutral 1 233
Neutral 2 233
Neutral 3 233
Unit - Energy Anlz. 2
Current (A)
Line 1 004.2
Line 2 004.2
Line 3 004.2
Neutral 000.0
Unit - Energy Anlz. 2
Active Power (kW)
Phase 1 0000.9
Phase 2 0000.9
Phase 3 0000.9
Total 0002.6
Unit - Energy Anlz. 2
Energy: 0028350kWh
Time: 0000003h
Unit - GSM Modem
Status:
Stand-by ext.modem
Offline 000%
Time next call: 0000s
SMS Queue: 00
Unit - KIPlink
Status: Offline
WiFi Network SSID:
KIPlink_032000000
IP Address:
000.000.000.000
Channel: WiFi
Unit - KIPlink
Module type:
Master-EthOFF-WiFiON
Version 38
Mask that displays the network analyser active energy and hour counter.
Visible if the network analyser is present and configured.
Mask that displays the values detected by the network analyser 2.
The supply voltage, absorbed current and absorbed active power are displayed.
Visible if network analyser 2 is present and configured and the unit power supply is
single-phase.
Mask that displays the electric values detected by the network analyser 2.
It displays phase-phase and phase voltage (phase-neutral) values.
Visible if the network analyser 2 is present and configured and the unit power supply
is three-phase.
Mask that displays the electric values detected by the network analyser 2.
Phase currents and neutral current are displayed.
Visible if the network analyser 2 is present and configured and the unit power supply
is three-phase.
Mask that displays the electric values detected by the network analyser 2.
The phase active power and the total active power absorbed are displayed
Visible if the network analyser 2 is present and configured and the unit power supply
is three-phase.
Mask that displays the network analyser 2 active energy and hour counter.
Visible if the network analyser 2 is present and configured.
GSM modem status display.
Visible only if the GSM modem is enabled.
Display of the status and main information of the KIPlink module.
Display of the type of KIPlink module.
Description
29