Main Status Display Masks; Main Mask - Mitsubishi Electric Evolution+ s-MEXT Technical Manual

2.4 Main status display masks

2.4.1

Main Mask

Visible from: Main loop.
The figure below shows the main mask layout, including the (numbered) areas in which it is divided:
The area above displays the hour and the date.
It also displays room humidity and temperature (only when the probe is installed) in real time (also in case the average value
mode for the local LAN units connected should be active).
Following is a description of the main mask areas:
•
Area 1: general unit status
•
Area 2: detailed status of the unit
•
Area 3: type of event (in case of active event)
•
Area 3_A: code of the event (in case of active event).
•
Area 4: Cold resources in operation.
•
Area 5: Free Cooling resources in operation.
•
Area 6: Humidity resources in operation.
•
Area 7: Hot resources in operation.
•
Area 8: current unit ON/OFF status
•
Area 9: BMS address of the unit
•
Area 10: LAN address of the unit
•
Area 11: the type of unit
•
Area 12: display of active functions icon.
The icons displayed in each area are listed on the following pages.
Version 38
Figure 2-7: representation of the main mask.
34