Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 75

Mask of the terminal
Manual
----------------------
Dehumidification
manual activation:
----------------------
----------------------
Manual
----------------------
pLAN Standby Funct.
Force recheck:
Force rotation:
OK, rotation forced
Wait 00010sec before
forcing the rot. Again
Manual – Work Hours
Manual Set
000000h
Reset:N
-----------------------
Manual – Work Hours
Manual Set
000000h
Reset:N
000000h
Reset:N
000000h
Reset:N
Manual – N° of Starts
Manual Set
0000000
Reset:N
----------------------
----------------------
Manual – N° of Starts
Manual Set
0000000
Reset:N
0000000
Reset:N
0000000
Reset:N
Manual
Energy Analyzer 1
Energy: 0000000kWh
Time: 0000000h
Reset counters:
Manual
Energy Analyzer 2
Energy: 0000000kWh
Time: 0000000h
Reset counters:
Version 38
Manual request for the activation of the dehumidification function.
N
Visible only if dehumidification management is enabled, if manual operation is
enabled and the unit is running.
N
N Manual request to rotate units in Stand-by in LAN.
Visible only on Priority units if LAN is enabled.
Reset times of operation of the fans in the various configurations of the unit and
manual setting of the times.
Reset times of operation of the heaters and humidifier and manual setting of the
times.
Reset of the number of unit starts and manual setting of the numbers.
Reset number of heater and humidifier starts and manual setting of the numbers.
Displays the energy meter and timer of the network analyser.
Reset the energy meter and timer of the network analyser.
Y
Displays and possible reset of the energy meter and timer of the network analyser
2
Y
Description Par.N.
75