Validation Form Insertion And Orientation; Validation Orientation; Form Requirements; Table 13 Validation: Printer Settings And Requirements - TransAct POSjet 1500 Programmer's Manual

Control Codes

Validation Form Insertion and Orientation

Validation Orientation

®
The POSjet 1500 accepts validation forms in both portrait and landscape orientations. Each of the two different
orientations have specific print zones, and print character spacing requirements. Regardless of the insertion
orientation, the minimum and maximum media size that can be accepted by the printer are as follows:

Form Requirements

Landscape Mode
Form size (Min.):
Form Size (Max):
Maximum Print Area:
Portrait Mode
Form size (Min.):
Form Size (Max):
Maximum Print Area:
In addition to the Min/Max size requirements, it is very important to use paper having a thickness between .003" to
.0047" (.076 mm. to .119 mm.). Using paper that is thicker than this may cause printing inconsistencies, and /or
paper jams. Refer to "Validation Form Requirements" on page 16 for a complete listing of specifications regarding
the use of validation forms.
Printer Settings
Form Orientation
Portrait (vertical)
Portrait (vertical)
Landscape (horizontal)
Landscape (horizontal)
Page 40
POSjet
2.75" width x 2.75" height (69.8 mm x 69.8 mm).
8.5" width x 11" height (215.9 mm x 279.4 mm).
2.5" width x 1.5" height
2.75" width x 2.75" height (69.8 mm x 69.8 mm).
2.75" width x 8.75" height (69.8 mm x 222.3 mm).
2.5" width x 7.8" height
Character Line Spacing
10 character lines per inch
10 character lines per inch
8 character lines per inch
8 character lines per inch

Table 13 Validation: Printer Settings and Requirements

Rev M
®
1500
Number of printed character lines
51 ( on 6 inch form)
78 (on 8.75 inch form)
9
12
Programmer' s Guide
Nov-07