Station Select Commands - TransAct POSjet 1500 Programmer's Manual

Control Codes

Station Select Commands

The following commands are used to load and position validation forms.
Function Select receipt station
ASCII
[ESC] f
Hexadecimal 1BH 66H
Decimal <27><102>
IPCL
&%SR
EPOS
[ESC] c 0 <n>
Description
This command ejects a form, if present, and enters receipt mode. All subsequent data will be
printed on the receipt.
Function Select validation station
ASCII
[ESC] j
Hexadecimal 1BH 6AH
Decimal <27><106>
IPCL
&%VS
EPOS
[ESC] c 0 <n>
Description
This command requests that a form be inserted in the printer. The
the form is loaded. When the printer senses the form, it automatically feeds it into the proper
position and all subsequent data is printed on the form. If the "FORM" key is pressed while the
printer is waiting for a form, the printer will enter receipt mode and print the validation
information on the receipt.
Note:
The form position is determined by the programmable slip stop. See the [ESC] [EM]L command
for setting the slip stop.
Note: This command may be configured with a time out. See [ESC][EM]C for details.
Note: An ENQ <16> will force the printer to stop waiting for a form and return to receipt mode.
Function Select validation station to N lines
ASCII
[ESC] k <n>
Hexadecimal
1BH 6BH <n>
Decimal
<27><107> <n>
IPCL
&%VL
EPOS
Description This command sets the validation stop to <n> lines and then requests that a form be inserted in the
printer. The
it automatically feeds it into the proper position and all subsequent data is printed on the form. If
the "FORM" key is pressed while the printer is waiting for a form, the printer will enter receipt
mode and print the validation information on the receipt.
Note:
This command may be configured with a time out. See [ESC][EM]C for details.
Note:
An ENQ <16> will force the printer to stop waiting for a form and return to receipt mode.
Page 158
®
POSjet 1500
Indicator will blink until the form is loaded. When the printer senses the form,
Rev M
Programmer' s Guide
Indicator will blink until
Nov-07