Table 38 Paper Sensor Commands - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide
Function Configure Audio Alert
ASCII [ESC] [BEL] <n
Hexadecimal
1BH 07H <n
Decimal
<27> <7> <n
IPCL
None
EPOS None
Description The [ESC] [BEL] <n
The default is a single sound lasting the period of time defined by the audio alert setting. The
[ESC] [BEL] <n
Where >
<n
1
<n >
2
<n >
3
Function Enable/disable paper feed
ASCII [ESC] p 5 <n>
Hexadecimal
1BH 70H 35H <n>
Decimal
<27> <112> <53> <n>
Range 0 ≤ n ≤ 255
Description
The [ESC] c 5 <n> command enables or disables the
(LSB) of <n> = one, the
prevent problems caused by accidentally pressing the
The
time set by the [GS] z 0 command for paper insertion and during the recovery confirmation time.
Where <n>
Bit 0 = 1 the
Bit 0 = 0 the Button is enabled.
Function Select Paper Sensor(s) to Stop Printing
ASCII
[ESC] p 4 <n>
Hexadecimal
1BH 70H 34H <n>
Decimal <27> <112> <52> <n>
0 ≤ n ≤ 255
Range
Description
The [ESC] p 4 <n> command selects the sensors that tell the printer to stop printing. The default
setting occurs only when the paper out sensor stops printing. When the paper roll low sensor is
enabled and the sensor detects a low condition during printing, the printer completes the current
line and then automatically goes off line. Replacing a new paper roll restarts the printing. When
the paper roll low sensor is disabled and a paper low condition is detected during printing, the
paper out (error) LED comes on, but the printer continues to print.
Note:
The POSjet
<n> is defined as follows:
Bit On/Off
0,1 Off
On
7 -
Nov-07
POSjet
> <n > <n >
1 2 3
> <n > <n >
1 2 3
> <n > <n >
1 2 3
> <n > <n > command alters the way the audio alert sounds.
1 2 3
> <n > <n > command allows the sound to be altered.
1 2 3
is the number of alert cycles
is the on time of the alert cycle in 10 mS intervals
is the off time of the alert cycle in 10 mS intervals
Button is disabled; when it is zero, the button is enabled. To
Button is temporarily enabled, regardless of how the command is set during the wait
Button is disabled
®
1500 does not allow the paper out sensor to be disabled. It is always on.
Hexadecimal Decimal
00H <0>
01H,02H,03H <1>,<2>,<3
>
00H <0>

Table 38 Paper Sensor Commands

Rev M
®
1500
Button. When the least significant bit
Button, use the command to disable it.
Paper roll low sensor disabled
Paper roll low sensor enabled
Undefined
Codes and Commands
Function
Page 175