TransAct POSjet 1500 Programmer's Manual page 153

Programmer' s Guide
Check printing guide lines
For best results, print checks in a dark color, Black is preferred however, Blue is acceptable. Green is risky because
some reader/sorter equipment uses green light during the image capture process. Red should not to be used because
most reader/sorter equipment uses red light during the image capture process.
Print quality is important, the Large Draft font is recommended. The characters are larger than the Small Font and
will scan better. Near Letter Quality (NLQ) can also be used, however, the characters take up more room, and use
more ink.
Using a CPI where the characters do not touch is critical. When using the Large Draft font, a CPI of 12 maximum is
recommended. If you chose the NLQ font you should use a CPI of 10 maximum.
The printing should be reasonably dark. To achieve a dark font the enhanced option should be activated for large
draft and NLQ fonts.
In summary, we recommend that checks be printed in page mode with the Large Draft font, in Black or Blue, at 12
CPI, with enhanced print set.
Note:
At this time, it is not possible to print the MICR fields with the POSjet
used in the printer is not magnetic.
Nov-07
®
POSjet 1500
Rev M
Codes and Commands
®
1500 printer. The ink
Page 139