TransAct POSjet 1500 Programmer's Manual page 205

Programmer' s Guide
Function Report the Electronic Journal
ASCII [ESC][GS]R< S
Hexadecimal
1BH 1DH 52H < S
Decimal
<27> <29><82> < S
IPCL
&%EQ <S> <L> (L and S are 4 digits ie. 00100020 for 20 records starting at 10)
EPOS
Description This command reports all or part of the electronic journal. <S
record to be printed and <L
+ <L > are 0, all records from the specified start to the end are reported. Setting both start and end
l
to 0 will report the complete contents of the journal.
Note:
The first record is identified as record 1.
The report format will be as follows:
[STX] Record number [SOH] Record Text [ETX]
...
[EOT]
Function Print/Report an Electronic Journal Log
ASCII
[ESC][GS]L Print the report
Or
[ESC][GS]l Return the report
Hexadecimal 1BH 1DH 4CH or 6CH
Decimal
<27> <29><76> or <108>
IPCL
&%UL (No IPCL for returning the report)
EPOS
Description
This command prints or returns a summary of the electronic journal. The format is as follows:
Electronic journal is inactive. (The electronic journal is off, or not initialized)
or Electronic journal has xxxx Records and is full.
or Electronic journal has xxxx Records with yyyyyy bytes free.
Note: Records are generated internally to allow greater storage security. A record will automatically be
generated 5 seconds after the printer becomes idle.
Function Activate/Deactivate Auto Journal
ASCII [ESC]i<n>
Hexadecimal 1BH 69H
Decimal <27> <105>
IPCL
&%VJ (Activate only)
Description This command activates or deactivated the storing of information
Where: n = 1 Activates the saving of data.
n = 0 stops saving data.
This feature may be activated by default by setting Microline Journal in the configuration menu to
Active
Nov-07
®
POSjet 1500
>< S >< L >< L >
l h l h
>< S >< L >< L >
l h l h
>< S >< L >< L >
l h l h
>*256 + <L > specifies the number of records to report. If <L
h l
Rev M
Codes and Commands
Series 50 Compatibility
>*256 + <S > specifies the first
h l
Page 191
>*256
h