Control Codes
Paper Low Adjustment Requirements
Use the following table to decide how much paper you want to remain after paper low sensing has occurred.
TransAct's expected results are based on paper and paper roll with these specifications. Refer to "Paper and Core
Diameter" on page 15 for paper measurements.
Paper Low Adjustment Settings
UPPER LIMIT: 3 turns (counter clockwise)
2 turns (counter clockwise)
1 turns (counter clockwise)
FACTORY SETTING
1 turn (clockwise)
2 turns (clockwise)
LOWER LIMIT: 3 turns (clockwise)
Page 30
®
POSjet
1500
Approximate Paper
Remaining (in feet)
24'
'
22
16'
12'
7
'
'
3.5
1.25'
Table 11 Paper Low Setup
Rev M
Programmer' s Guide
Paper Roll Diameter
1.420" (36mm)
1.375" (34.9mm)
1.250" (31.7mm)
1.175" (29.8mm)
1.050" (26.6mm)
.950" (24.1mm)
.885" (22.4mm)
Nov-07