TransAct POSjet 1500 Programmer's Manual page 218

EPOS Control Codes
Function Print and Reverse Feed <n> Lines
ASCII [ESC] K <n>
Hexadecimal
1BH 4BH <n>
Decimal
<27> <75> <n>
Range 0 ≤ n ≤ 48
Description
The [ESC] K <n> command prints the data in the print buffer and feeds the paper [<n> x (1/144)]
inches in the reverse direction. Consequently, the printer can feed the paper in half-dot units in the
reverse direction. The command is used to temporarily feed a specific length without changing the
line spacing set by other commands.
Function Print and Reverse Feed
ASCII [ESC] j
Hexadecimal 1BH 6AH
Decimal
<27> <106>
0 ≤ n ≤ 48
Range
Description
The [ESC] j command prints the data in the print buffer and feeds the paper one line in reverse.
Page 204
®
POSjet 1500
Rev M
Programmer' s Guide
EPOS ONLY
Nov-07