Rotated Print Summary - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide
Note 3 Use the [ESC] I <n> command to select two-pass rotated font. The font selection must be made
before the rotate command.
Note 4 Only enhanced and emphasized attributes are available for formatted, rotated print.
attributes are not available on a character basis. They affect all of the rotated text after the [ESC] r
command. Enhanced and emphasized attributes must be set before the [ESC] r command is
issued.

Rotated Print Summary

Begin 90° ° ° ° rotated print
Function
ASCII [ESC] r <1>
Hexadecimal 1BH 72H 01H
Decimal
<27> <114> <1>
IPCL
&%R1
Begin 90° ° ° ° rotated print with line formatting
Function
ASCII
[ESC] r <5>
Hexadecimal
1BH 72H 05H
Decimal <27> <114> <5>
IPCL &%R5
Begin 270° ° ° ° rotated print
Function
ASCII [ESC] r <3>
Hexadecimal
1BH 72H 03H
Decimal
<27> <114> <3>
IPCL
&%R3
Function Begin 270° ° ° ° rotated print with line formatting
ASCII
[ESC] r <7>
Hexadecimal 1BH 72H 07H
Decimal <27> <114> <7>
IPCL
&%R7
EPOS
[ESC] T <1>
Begin 90° ° ° ° rotated print with two pass font
Function
ASCII
[ESC] r <9>
Hexadecimal
1BH 72H 09H
Decimal
<27> <114> <2>
IPCL &%R9 or &%RX09
EPOS none
Begin 90° ° ° ° rotated print with two pass font and line formatting
Function
ASCII
[ESC] r <13>
Hexadecimal
1BH 72H 0BH
Decimal
<27> <114> <13>
IPCL
&%RX13
EPOS none
Begin 270° ° ° ° rotated print with two pass font
Function
ASCII [ESC] r <11>
Hexadecimal 1BH 72H 0BH
Decimal
<27> <114> <11>
IPCL
&%RX11
EPOS
none
Begin 270° ° ° ° rotated print with two pass font and line formatting
Function
ASCII
[ESC] r <15>
Nov-07
®
POSjet 1500
Rev M
Codes and Commands
Page 129
These