Preventing And Clearing Validation Jams - TransAct POSjet 1500 Programmer's Manual

Control Codes

Preventing and Clearing Validation Jams

Inserted forms should not be touched during the printing, or ejection process. Pressing or pulling the paper during
ejection may cause the validation process to jam. If a jam condition occurs, clear it as described below:
Removing a Validation Jam
If a validation jam occurs, and the top of the form is still visible in the form insertion area, remove the form by
simply pressing and holding the
be removed manually.
Removing a Validation Jam Manually
1. Open the printer's front cover.
2. Insert your index finger underneath the ink carriage and evenly pull the form out toward you until it is
completely removed from the printer.
3. Close the printer's covers and resume operation.
Page 42
®
POSjet 1500
Button. If the top of the form is not visible in the form insertion area, it can
Rev M
Programmer' s Guide
Nov-07