TransAct POSjet 1500 Programmer's Manual page 140

Control Codes
Function Select superscript
ASCII [ESC] S <0>
Hexadecimal 1BH 53H 00H
Decimal
<27> <83> <0>
IPCL
&%SP
EPOS
none
Description
The [ESC] S <0> command selects superscript. The following characters are printed half size on
the upper side of the print line.
Note 1
Superscript is not available in all print modes.
Function Select subscript
ASCII [ESC] S <1>
Hexadecimal 1BH 53H 01H
Decimal <27> <83> <1>
IPCL
&%SB
EPOS
none
Description
The [ESC] S <1> command selects subscript. The following characters are printed half size on the
bottom side of the print line.
Note 1
Subscript is not available in all print modes.
Function End superscript or subscript
ASCII
[ESC] T
Hexadecimal
1BH 54H
Decimal <27> <84>
IPCL
&%SE
EPOS
none
Description
The [ESC] T command ends superscript or subscript.
Function Begin italics
ASCII
[ESC] % G
Hexadecimal 1BH 25H 47H
Decimal <27> <37> <71>
IPCL &%MI
EPOS
[ESC] 4
Description The [ESC] % G command begins italic print mode.
Note 1 Italics are not available in all print modes.
Function End italics
ASCII
[ESC] % H
Hexadecimal
1BH 25H 48H
Decimal
<27> <37> <72>
IPCL
&%CI
EPOS [ESC] 5
Description The [ESC] % H command ends italic print mode.
Page 126
®
POSjet 1500
Rev M
Programmer' s Guide
Nov-07