TransAct POSjet 1500 Programmer's Manual page 206

Control Codes
Electronic Journal
Printing/Reporting and Resetting the Electronic Journal
The electronic journal may be printed on the receipt or reported to the host. The printed report will print each
journal entry with a entry separator defined by the user (or, if not defined, with a default). The journal can be erased
and reinitialized at any time. It is up to the host application to assure the electronic journal is reported or printed
before it is erased. To provide some level of security on the erase process, the erase function is password protected.
The password is set by the previous initialize command. See the [ESC][GS]I and E commands.
There are two ways to print the electronic journal. One is under host control the second is by entering journal print
mode and using the keypad to control the printout.
Entering and using Journal Print Mode
Journal print mode can be used to initialize, print the erase the electronic journal. To provide a level of security for
the journal, if the electronic journal is initialized under software control and a password is provided, the electronic
journal can not be erased in journal print mode. There is also a factory configured mode that completely disables
this feature.
To enter Journal Print Mode:
Press and release the * Button to switch the printer into STANDBY/OFF mode. (The
6.
will be not be illuminated.)
7. Press and hold the
8. While holding the
9. When the red,
10. Follow the directions printed on the receipt to cycle through and select the desired option.
The available options are:
10. Initialize Journal. (If the electronic journal is not initialized)
11. Print Complete Journal.
12. Erase Complete Journal. (If the electronic journal is not password protected)
13. Print Last 20 Records
14. Print First Record.
15. Skip 10 Records.
16. Back 10 Records.
17. Print remaining journal.
18. Print last record.
When journal print is entered, the printer will print a short list of instructions, the available options, and a summery
of the total number of records in the journal and the amount of space left.
Journal Print Mode Options
Initialize Journal
If this option is offered, the journal has never been initialized. Selecting this option will initialize the journal with
no password. Once initialized, the journal configuration can not be changed unless the journal is erased by
command.
Print Complete Journal.
This option will print the complete journal log from record 1 to the end. The printer will use the default
configuration and emulation to print the log. That is if the printer is configured for Ithaca PcOS emulation and set to
6 lpi, large draft 16 cpi, the printer will print the log with these defaults. If a journal entry has been saved with print
mode settings they will take effect for all following entries.
Erase Complete Journal.
Page 192
®
POSjet 1500
Button.
Button, press and release the * Button.
blinks, release the
Rev M
Programmer' s Guide
Button.
Nov-07