Universal Color Command Descriptions - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide

Universal Color Command Descriptions

Function Begin Named Universal Graphic Record
IPCL
&%UB <Name..>&
Description
The &%UB <Name..>& command initializes the universal graphic buffer structure, and redirects
the following data to the universal graphic buffer. It uses the <Name..> field as a reference. If the
name already exists in the flash user store, the command is ignored. The command must be
followed by the "End name universal graphic record" command with the same name. If the data
that follows is larger than the universal graphic buffer (about 16K), the universal graphic
definition is terminated without saving any data.
Function End Named Universal Graphic Record
IPCL
&%UG <Name..>&
Description The &%UG <Name..>& command ends the universal graphic record operation and saves the
universal graphic to flash. It uses the <Name..> field to verify the command end and must match
the "Begin named universal graphic record" command. If the name already exists in the flash user
store or the universal graphic memory is exceeded, the command is invalid, and the <Name..>
field prints.
Function Run Universal Graphic Data from User Store
IPCL &%UR <Name..>&
Description The &%UR <Name..>& command loads the referenced universal graphic into the universal
graphic buffer. The universal graphic buffer is then inserted into the data stream. If the named
item does not exist or is not a universal graphic, the POSjet
Function Flag Item as a Start-Up Universal Graphic
IPCL
&%US <Name.. >&
Description
The &%US <Name.. >& command flags the referenced item to be processed at startup. Only one
user character definition and one universal graphic may be flagged to run at startup.
Function Delete Item from User Store
IPCL &%UD <Name..>&
Description The &%UD <Name..>&command removes an item from user store and frees up space. If the item
does not exist, the POSjet
Function Flush Information from User Store
IPCL
&%UFALL&
Description
The &%UFALL& command clears all entries in user store and frees the data space. It must have
the name, "ALL" (in uppercase) attached.
Nov-07
®
POSjet 1500
®
1500 ignores the command.
Rev M
Data Processing and
Communications
®
1500 ignores the command.
Page 247