TransAct POSjet 1500 Programmer's Manual page 262

Data Processing and
Communications
Function Report on User Store
IPCL &%UQ&
Description The &%UQ& command prints a status report. The intention of the command is to aid in universal
graphic development.
Function Redefine User Store Termination Character
IPCL
&%UT<n>
Description
This command allows the terminator used to signal the end of the name field in user store
commands to be modified. The value of <n> is used for the terminator. The value of n may be
from 0 to 255.
Example
If &%UT% were sent to the printer the user store command to run universal graphic "Demo"
would be &%URDemo%. This command redefines the default "&" termination character.
Function Set Print Color
IPCL &%CL <n>
Description This command allows various colors to be selected on printer emulations that do not support color
text.
Where n: 0
1, 2, 3
Function Feed and Activate the Auto-cutter
IPCL
&%UA <m
Description
This command feeds m dot rows and activates the Auto-cutter. The feed is in 1/96 increments
Where m: m = m
* 100 + m
1
Page 248
POSjet
Print with the Left cartridge (Typically Black)
Print with the Right cartridge (Typically Red, Blue, or Green)
> <m > <m >
1 2 3
. m is a 3 digit number from 000 to 255
*10 + m
2 3
Rev M
®
1500 Programmer' s Guide
Nov-07