Table of Contents
Advertisement
Control Codes
Operational Troubleshooting
Understanding Fault Indicators
The
Three types of faults exist
Fully-recoverable faults
Semi-recoverable faults
Non-recoverable faults
Fully-recoverable and Status
A fully-recoverable error will restart printing exactly where it stopped when the error occurred. Printing will resume
after error has been properly addressed.
Semi-recoverable
A semi-recoverable error requires that the printer be reset or power cycled after the cause of the error is corrected
The amount of information lost is dependent on the type of error and the state of the information being processed.
Non-recoverable
A non-recoverable error will most likely produce information loss and may require a service call.
Indicator Light Blink Patterns
If during normal operation, the
indicator shows the error by blinking a pattern. Pressing the * Button restarts the printer. Blink patterns
The
9
are defined as follows.
1 Blink
2 Blink
3 Blink
9
The blink rate is effected by the data received. The faster the data, the faster the printer blinks.
Page 86
®
POSjet
is the primary fault indicator. It is always On or blinking if a fault has occurred.
Paper out or cover open
Head Jam
Component failure
indicator is lit and the
(1 blink, pause)
(2 blinks, pause)
(3 blinks pause)
Rev M
1500
indicator is blinking, a minor error occurred.
__ __________________ ______
__ __ _______________ __ ___
__ __ __ ___________ __ __ _
Programmer' s Guide
Nov-07
Advertisement
Table of Contents
Troubleshooting
