Roland VM-C7100 Owner's Manual page 66

[FLEX BUS 1 to 6]/[FLEX BUS 7 to 12]
Sets signals to be sent to Flex Buses 1 to 12.
• PAN: Fixed sound position
• LEVEL
• BUS SEND: Activates/de-activates sending of signal to a Flex Bus.
[PREAMP GAIN]
Sets the preamplifier.
• GAIN: Analog preamplifier gain
• PHANTOM: Supplies/does not supply phantom power to the microphone.
[CH PAN]/[CH LEVEL]
Sets signals to be sent to the main stereo bus.
• PAN: Fixed sound position
• LEVEL
• MAIN SEND: Sends/does not send signals to the main stereo bus.
[SURROUND DEPTH]
Sets surround depth.
• PAN: Direction of sound (right/left)
• DEPTH: Direction of sound (up/down)
• MAIN SEND: Sends/does not send signals to the main channel.
[CUE PAN]/[CUE LEVEL]
Sets signals to be sent to the Cue bus.
• PAN: Fixed sound position
• LEVEL
• CUE SEND: Sends/does not send signals to the Cue bus.
Chapter 4 Useful Functions
Pan control is inactive
when no Flex Buses are
linked. To learn about Flex
Bus linking, refer to p. 102.
When Flex Buses are
linked, changing the
parameter setting of one
also changes the parameter
setting of the other.
The same screen appears
after either [CH PAN] or
[CH LEVEL] is pressed.
After [CH PAN] is pressed,
however, the pan value can
be set using a fader.
The same screen appears
after either [CUE PAN] or
[CUE LEVEL] is pressed.
After [CUE PAN] is
pressed, however, the Cue
pan can be set using a
fader.
65