Roland VM-C7100 Owner's Manual page 42

Chapter 2 Basic Operations and Their Settings (System/Project)
off with [F3].
Cautions on cascade connection
• The signal from the 2nd UNIT is output after passing the level setting (fader).
With cascade connection, normally set the level of the cue, main and Flex Buses
of the 2nd UNIT at 100 (0 dB).
• The cue from the 2nd UNIT is sent to the 1st UNIT via the monitor signal line.
Select "CUE" as the monitor source of the 2nd UNIT.
42