Roland VM-C7100 Owner's Manual page 138

3 BAND EQ (Equalizer)
Sw (Switch)
Hi Gain (High Gain)
Hi Freq (high frequency)
Hi Q (High Q)
Hi Type (High Type)
Mid Gain (Middle Gain)
Mid Freq (middle frequency)
Mid Q (Middle Q)
Lo Gain (Low Gain)
Lo Freq (low frequency)
Lo Q (Low Q)
Lo Type (Low Type)
Output Level (Output Level)
Pitch Shifter:
Sw (Switch)
Effect Level (Effect Level)
Direct Level (Direct Level)
Cromatic (Chromatic Pitch)
Fine (Fine Pitch)
Delay: Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.
Sw (Switch)
Effect Level (Effect Level)
Direct Level (Direct Level)
Time (Delay Time)
Feedback Level (Feedback Level)
Chorus:
Sw (Switch)
Rate (Rate)
Depth (Depth)
Pre-Delay (Pre-Delay)
Effect Level (Effect Level)
Direct Level (Direct Level)
*1: If Low Type (Lo Type) or High Type (Hi Type) is set to "Shelv (Shelving Type)," the setting for Lo Q or High Q
is invalid.
Frequency (p. 237), Q (p. 243), Shelving Type (p. 244), Peaking Type (p. 242), Noise Suppressor (p. 240),
Limiter (p. 238), De-esser (p. 234), Enhancer (p. 236), Equalizer (p. 236), Pitch Shifter (p. 242), Delay (p. 234),
Chorus (p. 233)
On, Off
-12– +12 dB
1.4–20.0 kHz
0.3–10.0
Shelv, Peak
-12– +12 dB
200–8000 Hz
0.3–10.0
-12– +12 dB
20–2000 Hz
0.3–10.0
Shelv, Peak
0–100
Shifts the pitch.
On, Off
-100–100
-100–100
-12–12
-100–100
On, Off
-100–100
-100–100
0–1000 ms
-100–100
Adds spaciousness and thickness to the sound.
On, Off
0.1–10.0 Hz
0–100
0–50 ms
-100–100
-100–100
Chapter 8 Using the Internal Effects
Turns the equalizer on or off.
Sets the boost/cut amount in the high frequency band.
Sets the center frequency in the high frequency band.
Sets the width of the area around the high frequency that
will be affected by the gain settings.
Sets the type of the high frequency band equalizer
(shelving type or peaking type).
Sets the boost/cut amount in the middle frequency band.
Sets the center frequency in the middle frequency band.
Sets the width of the area around the middle frequency that
will be affected by the gain settings.
Sets the boost/cut amount in the low frequency band.
Sets the center frequency in the low frequency band.
Sets the width of the area around the low frequency that
will be affected by the gain settings.
Sets the type of the low frequency band equalizer
(shelving type or peaking type).
Sets the volume after passing through the equalizer.
Turns the pitch shifter on or off.
Sets the volume of the pitch shift sound.
Sets the volume of the direct sound.
Pitch variation (by semitone)
Pitch variation (by cent)
Turns the delay on or off.
Sets the volume of the delay sound.
Sets the volume of the direct sound.
Sets the time from direct sound until when the delay sound
is heard.
Sets the amount of the delay sound should be returned to
the delay input.
Turns the chorus on or off.
Sets the rate of modulation.
Sets the depth of modulation.
Sets the time delay from when the direct sound begins until
the processed sound is heard.
Sets the volume of the chorus sound.
Sets the volume of the direct sound.
*1
*1
137