Roland VM-C7100 Owner's Manual page 49

fig.03-06
• Positioning the cursor on each section of the screen enables a channel whose
settings change according to the Scene selected using [F1] to [F6] (black highlight
indicates that the Scene is valid).
CURRENT SCENE NAME EDIT page
fig.03-07
• A Scene name (12 characters max.) selected from the list on the top page (SCENE
SELECT/ACTIVE PARAMETER) can be changed. The change will be reflected
in the list.
Screen operations are similar to those for naming an input channel. For details,
refer to "Naming input channels" (p. 83). The differences between them are as
follows:
• No short names (3 characters) can be used.
• The EZ naming function is not available.
• Assignments of the V1 to V6 knob functions (except common knobs).
• Functions added to [F6] (write-protect on/off).
The write-protect (on or off) state is also indicated by the letter "P"
(checked or unchecked) in the list on the top page of this operation (SCENE
SELECT/ACTIVE PARAMETER).
Chapter 3 Data Storage and Retrieval
When [F6] (PROTECT) is
highlighted in black on the
display, the Scene whose
name is being changed is
erase-protected, thus
preventing the Scene from
being cleared. When [F6]
(PROTECT) is turned off,
clearing is enabled.
When a project is erased
from a memory card, the
Scenes contained within it
are also erased, even if
they're erase-protected.
49