Roland VM-C7100 Owner's Manual page 170

AnalogPhaser
Two units of analog phasers are placed in parallel to accommodate stereo sounds. Surges unique to Phaser is
created by adding sounds with the phase shifted periodically.
fig.08-75
Input L
Input R
Number of stages of Phaser
As the number of sages of Phaser increases, the number of frequency points suppressed increases as well,
generating sharper effect.
fig.08-76e
Level
Level
Parameter (full name)
Analog Phaser:
Sw (Switch)
8STAGE (8 Stage)
LFO1/2 Rate (LFO1/2 Rate)
LFO1/2 Depth (LFO1/2 Depth)
LFO1/2 ChB Inv (LFO1/2 Channel B Inverse) On, Off
Reso (Resonance)
Freq (Frequency)
Phaser (p. 242), Resonance (p. 243)
Output L
Analog
Phaser L
Analog
Phaser R
Output R
4 stage
Frequency
8 stage
Frequency
Setting
Two units of analog phaser are placed in parallel to accommodate stereo
sounds.
On, Off
On, Off
0–100
0–100
0–100
0–100
Chapter 8 Using the Internal Effects
Function
Turns the analog phaser on or off.
Sets the number of stages of phaser
(On: 8stage, Off: 4Stage).
Sets the phase effect cycle length.
Sets the depth of the phase effect cycle.
"On" indicates that the surge phase should be inverted and
"Off" indicates that it should not be inverted.
Enhances frequency components at around the center
frequency set with Frequency.
Sets the center frequency to which the phase effect is
applied.
169