Roland VM-C7100 Owner's Manual page 169

Chapter 8 Using the Internal Effects
AnalogFlnger (Analog Flanger)
Simulates Roland SBF-325 Analog Flanger. Provides three types of flanger effects as well as chorus-like effect.
fig.08-73
Input L
Input R
Types of Flanger Effect
Analog Flanger provides a variety of flanger effects or chorus effects. Selecting the desired flanger effect type in
Mode.
FL1:
FL2:
FL3:
CHO:
Parameter (full name)
Analog Flanger:
Sw (Switch)
Modulation Freq (Modulation Frequency)
Modulation Rate (Modulation Rate)
Modulation Depth (Modulation Depth)
Feedback Level (Feedback Level)
Mode (Mode)
ChB Inv (Channel B Inverse)
MIx A Inv (Mix A Inverse)
MIx B Inv (Mix B Inverse)
*1: This feature is disabled when Mode is set to "CHO."
*2: Excessively large values may cause oscillation.
Feedback (p. 236), Flanger (p. 236)
168
Output L
Analog
Flanger L
Analog
Flanger R
Output R
General monaural flanger
Stereo flanger that allows stereo location of the direct sound to take effect.
Cross mix flanger that provides more powerful effect
Chorus effect
Setting
Simulates SBF-325 Analog Flanger.
On, Off
0–100
0–100
0–100
0–100
FL1, FL2, FL3, CHO
On, Off
On, Off
On, Off
Function
Turns the analog flanger on or off.
Sets the center frequency subject to application of the
flanger effect.
Sets the flanger's modulation rate.
Sets the depth of the flanger modulation.
Sets the amount of the delayed sound should be returned
to the flanger input.
Sets the type of flanger effects.
"On" indicates that the Flanger effect on Channel B should
be inverted. "Off" indicates that it should not be inverted.
"On" indicates that the phase should be inverted for mixing
Channel A Flanger sound into the direct sound.
"Off" indicates that the phase should not be inverted.
"On" indicates that the phase should be inverted for mixing
Channel B Flanger sound into the direct sound.
"Off" indicates that the phase should not be inverted.
*1, *2