Roland VM-C7100 Owner's Manual page 128

3 BAND EQ (Equalizer)
Sw (Switch)
Hi Gain (High Gain)
Hi Freq (high frequency)
Hi Q (High Q)
Hi Type (High Type)
Mid Gain (Middle Gain)
Mid Freq (middle frequency)
Mid Q (Middle Q)
Lo Gain (Low Gain)
Lo Freq (low frequency)
Lo Q (Low Q)
Lo Type (Low Type)
Output Level (Output Level)
*1: If Low Type (Lo Type) or High Type (Hi Type) is set to "Shelv (Shelving Type)," the setting for Lo Q or High Q
is invalid.
Frequency (p. 237), Q (p. 243), Shelving Type (p. 244), Peaking Type (p. 242), Pitch Shifter (p. 242),
Equalizer (p. 236), Feedback Level (p. 236)
Chapter 8 Using the Internal Effects
On, Off Turns the equalizer on or off.
-12 - +12 dB Sets the boost/cut amount in the high frequency band.
1.4 - 20.0 kHz Sets the center frequency in the high frequency band.
0.3–10.0 Sets the width of the area around the high frequency that
will be affected by the gain settings.
Shelv, Peak Sets the type of the high frequency band equalizer
(shelving type or peaking type).
-12 - +12 dB Sets the boost/cut amount in the middle frequency band.
200–8000 Hz Sets the center frequency in the middle frequency band.
0.3–10.0 Sets the width of the area around the middle frequency that
will be affected by the gain settings.
-12 - +12 dB Sets the boost/cut amount in the low frequency band.
20 - 2000 Hz Sets the center frequency in the low frequency band.
0.3–10.0 Sets the width of the area around the low frequency that
will be affected by the gain settings.
Shelv, Peak Sets the type of the low frequency band equalizer
(shelving type or peaking type).
0–100 Sets the volume after passing through the equalizer.
*1
*1
127