Roland VM-C7100 Owner's Manual page 27

5. The battery should now be visible, as shown in the following.
fig.01-16
6. Replace the old battery with a new one.
fig.01-17
7. Put the battery cover back on.
8. Turn the power on and set the time for the internal clock (25).
9. Using the memory card you used for backup in step 1, restore the previous
state (54).
IMPORTANT
Following message may appear in the display, for instanse, when you turn on the
console after replacing the battery.
fig.01-17a
This message is NOT for warning any malfunction or breakdown. In this case, you
need to initialize the internal memory. Please execute the "Factory Reset"
procedure (p. 33).
Implementing factory reset deletes all user settings on the console. Please store the
necessary data (such as user-customized libraries) in the memory card beforhand
(p. 44).
Chapter 1 Introduction
27