[SHIFT]+[PROJECT]
CURSOR [DOWN]
(TEMPO/METRONOME)
fig.12-04
• [EXT SYNC]:
• SYNC MASTER:
• MIDI SYNC Tx SW:
• SYNC OFFSET:
• FRAME TYPE:
• MMC CONTROL:
• MMC MASTER:
• MIDI THRU CONSOLE:
• TEMPO:
[F3] (SYNC CLOCK)/[F4] (MIDI)/[F5]
OFF
INT
MTC or MIDI CLOCK
Provides the time on both the console and other
devices with an offset when the console runs in
synchronization with a device such as a video
device.
Sets the frame rate for the device to be connected.
ON (Only when the console controls
synchronization starting and stopping.)
INT (Only when the console controls
synchronization starting and stopping.)
OUT
Tempo (Only when transmitting a MIDI clock)
Chapter 12 Using with MIDI Devices
The console only handles
MIDI clock transmission. In
this case, you cannot
change the tempo while
music is being played since
it does not have a tempo
map.
227