Roland VM-C7100 Owner's Manual page 112

Determining the effect position
1. Invoke the Effect screen menu.
For effects 1 to 8, press [EFFECTS 1-8], or for the master effect, press [SP MODELING
(MASTER FX)].
fig.08-002
2. Select the effect column to use with CURSOR [UP] and [DOWN].
The effects appear on the screen in the following order from top to bottom: 1 to 3, 4
to 6, and 7 to 8.
* This step is not required for the master effect.
3. Invoke the Edit Effect screen.
Press EDIT for the effect in question. ([F2], [F4] or [F6]. [F2] for the master effect.)
4. Select the ASSIGN page with [PAGE DOWN].
The display changes to the screen where effect positions are determined.
fig.08-003
5. Select either L or R of the effect (*).
Select L or R using CURSOR [UP] and [DOWN].
* This step is not required for the master effect.
Chapter 8 Using the Internal Effects
To jump to the same screen
for another effect, hold
down [EFFECTS 1-8] and
press the numeric key ([1]–
[8]) for the corresponding
effect.
111