Roland VM-C7100 Owner's Manual page 273

MIDI Implementation
Universal System Exclusive Message
MIDI Time Code
Status Data byte
F0H 7FH,7FH,01H,01H,hr,mn,sc,fr
Byte Description
F0H Exclusive Status
7FH Universal System Exclusive Realtime Header
7FH Specify all connected devices
01H MIDI Time code
01H Full Message
hr type/hours (0yyzzzzz)
yy
mn Minutes
sc Seconds
fr Frames (0 - 29)
F7H EOX
If the system parameter "SYNC MASTER" is "INT" and "SYNC GENERATOR" is "MTC"
and "SYNC OUT(CONSOLE)" is "ON," the current location will be transmitted using full
time messages when a locate operation occurs.
If the system parameter "SYNC MASTER" is "EXT" and "SYNC EXT SOURCE" is "MTC,"
this device will receive full time messages and will locate accordingly.
INQUIRY MESSAGE
Identity Request
Status Data byte
F0H 7EH,Dev,06H,01H
Byte Description
F0H Status of System Exclusive Message
7EH Universal System Exclusive Realtime Header
Dev Device ID
06H General Information
01H Identify Request
F7H EOX
The message is used to request the particular information of the VM-C7200/C7100.
The VM-C7200/C7100 does not transmit the message.
If the VM-C7200/C7100 received the message and the device ID of the message is same as
its device ID or 7FH, the VM-C7200/C7100 transmits the following Identity Reply message.
Identity Reply
Status Data byte
F0H 7EH,Dev,06H,02H,41H,1EH,01H,nnH,00H,vvH,00H,ssH,ssH
Byte Description
F0H Status of System Exclusive Message
7EH Universal System Exclusive Realtime Header
Dev Device ID
06H General Information
02H Identity Reply
41H Manufacturer ID
1EH 01H Device Family Code
nnH 00H Device Family Number
(0:VM-3100), (1:VM-7100), 2:VM-C7100, (3:VM-7200), 4:VM-C7200
vvH 00H Available Option
0 0 0 0 - 0 0 x x
ssH ssH Software Revision Level
F7H EOX
272
Status
F7H
(sub-ID #1)
(sub-ID #2)
Time code type
0 = 24 frame/sec
1 = 25 frame/sec
2 = 30 frame/sec (Drop frame)
3 = 30 frame/sec (Non-drop frame)
zzzzz Hours (0 - 23)
(0 - 59)
(0 - 59)
(End of Exclusive)
Status
F7H
(or 7FH)
(sub-ID #1)
(sub-ID #2)
(End of Exclusive)
(sub-ID #1)
(sub-ID #2)
(Roland)
(V-Mixer)
(VM-xxxxx)
| +—— C7100/C7200
+———— Console Master/Slave
(End of Exclusive)
MIDI Machine Control Commands
Status
F0H
Byte
F0H
7FH
Dev
06H
aaH
:
bbH
F7H
(*) Refer to "3. MIDI Machine Control."
Data Transfer (RQ1, DT1)
Data Request (RQ1)
Status
F0H
Byte
F0H
41H
Dev
00H 1EH
11H
aaH
bbH
ccH
ssH
ssH
ssH
Sum
F7H
The message is used to request data to the VM-C7200/C7100.
The VM-C7200/C7100 does not transmit this message.
The VM-C7200/C7100 transmits the requested data using Data Set(DT1) under following
condition when it received the message.
1. The requested address correspond to the specified parameter base address of the VM-
C7200/C7100.
2. The requested size is over 1 byte.
Data Set (DT1)
Status
F0H
Status Byte
F7H F0H
41H
Dev
00H 1EH
12H
aaH
bbH
ccH
ddH
:
eeH
Sum
F7H
Data byte
7FH,Dev,06H,aaH, ..., bbH
Description
Status of System Exclusive Message
Universal System Exclusive Realtime Header
Device ID (or 7FH)
MMC Command Message
Command
:
Command
EOX (End of Exclusive)
Data byte
41H,Dev,00H,1EH,11H,aaH,bbH,ccH,ssH,ssH,ssH,,Sum
Description
Status of System Exclusive Message
Manufacturer ID (Roland)
Device ID
Model ID (V-Mixer)
Command ID (RQ1)
Address MSB
Address MID
Address LSB
Size MSB
Size MID
Size LSB
Checksum
EOX (End of Exclusive)
Data byte
41H,Dev,00H,1EH,12H,aaH,bbH,ccH,ddH, ..., eeH,Sum
Description
Status of System Exclusive Message
Manufacturer ID (Roland)
Device ID
Model ID (V-Mixer)
Command ID (DT1)
Address MSB
Address MID
Address LSB
Data
:
Data
Checksum
EOX (End of Exclusive)
Status
F7H
Status
F7H
Status
F7H