Roland VM-C7100 Owner's Manual page 115

Chapter 8 Using the Internal Effects
3. Open the effect library list.
Press LIBRARY for the desired effect. ([F1], [F3] or [F5]. [F1] for the master effect.)
The sub-window for the library list opens.
fig.08-005
4. Select a library to check its effect.
First, turn the V1 knob (SELECT GROUP) to select U (User) or P (Preset). (On
shipment, the user library contains the same data as in the preset library.) Then turn
the V2 knob (SELECT NUMBER) to select a number (000 to 199), referring to the
library names appearing on the screen.
Pressing [F1] (PREVIEW) to turn it on (displayed in reverse video) allows you to
hear its effect. Turning it off causes the effect to return to its previous state.
5. Validating your choice
After selection, press [F2] (CP/LOAD) and then copy the contents of the library to
validate your choice. Once validated, however, you cannot restore the original effect
setting.
114
A library named "------------"
in the on-screen list cannot
be used in the currently
selected effect. This is
because the library for
effects 1 to 8 is not
compatible with the one
for the master effect. The
same is true for the
algorithms (Speaker
Modeling) common to both
effects.
In addition, editing them
(see below) allows you to
achieve results that better
suit your purpose. You can
save up to 200 (U000 to
U199) user libraries in the
main unit (p. 117).