Roland VM-C7100 Owner's Manual page 136

Flanger:
Sw (Switch)
Rate (Rate)
Depth (Depth)
Manual (Manual)
Reso (Resonance)
Delay: Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.
Sw (Switch)
Time (Delay Time)
Shift (Shift)
Feedback Time (Feedback Delay Time)
Feedback Level (Feedback Level)
Effect Level (Effect Level)
Direct Level (Direct Level)
*1: The sum of the Delay Time value and the Delay Shift value should not exceed the setting range of Delay Time.
For example, if Delay Time is set to 800 ms, the setting range of Delay Shift is L200 to R200 ms.
Compressor (p. 233), Metal (p. 239), Distortion (p. 235), Overdrive (p. 241), Noise Suppressor (p. 240),
Auto Wah (p. 232), Guitar Amplifier Simulator (p. 238), Flanger (p. 236), Delay (p. 234), BPF (p. 233), LPF (p. 239),
Feedback Level (p. 236), Resonance (p. 243)
Adds effects similar to ascending/descending sound of a jet.
On, Off
0.1–10.0 Hz
0–100
0–100
0–100
On, Off
0–1000 ms
L1000–0–R1000 ms
0–1000 ms
-100–100
-100–100
-100–100
Chapter 8 Using the Internal Effects
Turns the flanger on or off.
Sets the rate of modulation for the flanger.
Sets the depth of modulation for the flanger.
Sets the center frequency subject to application of the
flanger effect.
Enhances frequency components at around the center
frequency set with Manual.
Turns the delay on or off.
Sets the time from direct sound until when the delay sound
is heard.*
Sets the delay time difference between the right and left
delay sounds.
Sets the feedback repetition cycle.
Sets the amount of the delay sound should be returned to
the delay input.
Sets the volume of the delay sound.
Sets the volume of the direct sound.
*1
135