Roland VM-C7100 Owner's Manual page 216

8. Turn the TIME/VALUE dial to shift the current position to the reference
point in the data to be moved (FROM).
Turning the TIME/VALUE dial shifts the current position by either hour, minute,
second or frame unit. To change the unit, press
while holding down [SHIFT].
9. Press [F1] (FROM) to assign the current position to FROM.
10.Turn the TIME/VALUE dial to set the current position to the position to
which data is to be moved.
11.Press [F2] (TO) to assign the current position to TO.
12.Turn the [V3] (DESTINATION) knob to select the channel to which data is
to be moved.
13.Turn the [V4] (INSERTION) knob to specify the moving method.
14.Press [F4] (EXEC) to execute MOVE.
When MOVE is completed, a "Complete" message is displayed.
15.Press [F6] (RETURN) and [F6] (EXIT), in this order, to return to the AUTO
MIX VIEW screen.
Chapter 11 Recording/Playing Back Fader or Knob Actions (Automix)
CURSOR [LEFT] or [RIGHT]
It is also possible to assign
the position specified with
the locator to TO or FROM.
Instead of the TIME/
VALUE dial, press the
LOCATE button to shift the
current position.
To move data to the same
channel, this setting does
not have to be changed.
To abort MOVE, press
[EXIT] to return to the
VIEW screen.
Press [UNDO/REDO] to
cancel the move just
performed (UNDO).
Pressing [UNDO/REDO]
once more restores the
post-move state (REDO).
215