Roland VM-C7100 Owner's Manual page 220

1. Check if the AUTO MIX VIEW screen is displayed (p. 208).
2. Press CURSOR [DOWN] to move the cursor over to the VIEW/SOURCE/
VALUE TRIM section.
3. Press [F6] (EDITMENU).
The EDIT MENU dialog is displayed. To clear the displayed dialog, press [F6]
(EXIT).
4. Press CURSOR [UP] to move the cursor to the top section in the dialog.
5. Press [F5] (GRADATION) to display the GRADATION screen.
6. Press CURSOR [DOWN] to move the cursor to the MARKER/SOURCE/
GRADATION sections.
7. Add markers as required.
See p. 218 for instructions on how to add markers.
8. Turn the [V3] (SOURCE) knob to select the channel subject to gradation.
9. Press [F5] (SET) to specify how GRADATION should be performed.
10.Press [F4] (EXEC) to execute GRADATION.
When GRADATION is completed, a "Complete" message will be displayed.
11.Press [F6] (RETURN) and [F6] (EXIT), in this order, to return to the AUTO
MIX VIEW screen.
Chapter 11 Recording/Playing Back Fader or Knob Actions (Automix)
Specify the region subject
to editing before
attempting to display the
screen for the gradation
operation. Without the
region subject to editing set
up, the screen for the
gradation operation cannot
be displayed.
To abort GRADATION,
press [EXIT] to return to
the VIEW screen.
Press [UNDO/REDO] to
cancel the gradation just
performed (UNDO).
Pressing [UNDO/REDO]
once more restores the
post-gradation state
(REDO).
219