Tcp Profile Parameters - Alcatel-Lucent 1850 User Provisioning Manual

Transport service switch
Table of Contents

Advertisement

Procedures
............................................................................................................................................................................................................................................................
Figure 5-49 TCA profile creation
........................................................................................................................................................................................................................
6
Table 5-29
panel parameters:
Table 5-29 TCP profile parameters
Parameter
Profile Type
User Label
Default
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009

"TCP profile parameters"

provides the description of Create TCA Profile
Description
The associated combo-box lists all the TCA profile type
which new instance is being created. The values are:
blank = none
GBE10 = 10 Gigabit Ethernet profiles
GBE= Gigabit Ethernet profiles
MAU = MAU port profile
ODU2 = ODU2 port profiles
STM1 = STM1 port profiles
STM4 = STM4 port profiles
STM16 = STM16 port profiles
STM64 = STM64 port profiles
VC4 = VC4 port profiles
VC44C = VC44C port profiles
VC416C = VC416 port profiles
VC464C = VC464 port profiles
It is an entry field which identifies the user label assigned
to a TCA profile instance. The value can be entered is < 1-
40 VALID USERLABEL CHARACTERS >, the default
value is LBL-THP<PFTYPE>-index (where index
represents the numerical identifier n=2,.,n of the TCAP
instance being created)
The associated combo-box allows to select the flag that
allows user to promote the modified TCA profile to a
default profile for the profile type it is part of. The
allowable values are: Y or N (default N).
Create TCA profile
5 - 6 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tss-320Tss-160

Table of Contents