Alcatel-Lucent 1850 User Provisioning Manual page 534

Appendix
............................................................................................................................................................................................................................................................
Command
ED-RINGMAP
ED-SQLMAP
ED-OAMPHB-
PROF
ED-STMn
ED-SYNCN-OUT
ED-SYNCN
............................................................................................................................................................................................................................................................
6 - 14 0
Description
Ringmap, specifies the sequence
of node IDs within a BLSR ring.
The first RINGMAP value defines
the node ID of the adjacent BLSR
node (east side). Subsequent
RINGMAP values define the node
ID of the BLSR node (in the
eastward side). The last
RINGMAP value defines the node
ID of the adjancent BLSR node
(west side).
Node identifier of the source node
in BLSR ring. Valid Values are:
Node Identifier of the destination
node in BLSR ring. Valid Values
are:
Edits the mapping between the
OAM type packet and the PHB
value to be used
Modifies the specified facility
parameter values for a previously
auto-created instance in the
context of equipment
provisioning.
Optical port assigned as Primary
Out Clock Reference
Optical port assigned as
Secondary Out Clock Reference
Optical port assigned as Primary
Out Clock Reference
Optical port assigned as
Secondary Out Clock Reference
Decision, if CRG is using sync
messaging (Qualities) to drive
synchronization
Parameter defaults
Parameter Default
RINGMAP <Previously
existing value>
(Factory default:
empty)
ENTRY <Previously
existing value>
EXIT <Previously
existing value>
TID Entry Required
TID Entry Required
PRIOREFA <Previously
existing value> or
NA (factory
default)
SECOREFA <Previously
existing value> or
NA (factory
default)
PRICREF <Previously
existing value> or
NA (factory
default)
SECCREF <Previously
existing value> or
NA (factory
default)
SYNCMSG <Previously
existing value> or
N (factory default)
Issue 1 February 2009
8DG08763KAAA