Alcatel-Lucent 1850 User Provisioning Manual page 542

Appendix
............................................................................................................................................................................................................................................................
Command
ENT-GBE10
............................................................................................................................................................................................................................................................
6 - 14 8
Description
Automatic In-Service Threshold,
specifies how long an input signal
must be present on the facility
without a failure condition before
the system transitions the facility
into the In-Service state.
The parameter encmode describes
the encapsulation mode used to
transport the client signal.
Alarm Severity Assignment
Profile Name (ASAP)
Definition of the active threshold
crossing alarm profile (TCA)
Attribute that controls whether
inbound error frames are
discarded or passed. This attribute
is meaningful only for GFP
transport modes.
Attribute that controls whether
10GbE LAN transmitter responds
to incoming failure by generating
Remote Fault indication ordered
set.
Primary State, specifies the
primary state to which the facility
is set.
Secondary State, specifies the
secondary state to which the
facility is set.
Parameter defaults
Parameter Default
AINSTH 08-00
ENCMODE GFP-F
ALMPROF <currently
designated default
profile>
TCAPROF <currently
designated default
profile>
ERRFRMD DISABLE
ROP
RFIRESP DISABLE
PST IS
SST <Null>
Issue 1 February 2009
8DG08763KAAA