Create Transit Tunnel - Alcatel-Lucent 1850 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................

Create transit tunnel

Purpose
Use this procedure to create a new Transit Tunnel.
........................................................................................................................................................................................................................
1
Select Create Transit Tunnel from the Tunnel Management panel as shown in
Figure
Figure 5-73 Tunnel segment - from and to
........................................................................................................................................................................................................................
2
Enter the following Tunnel Segment From and Tunnel Segment To parameter values:
– MPLS Port - Specifies the AID of the provisioned port that is a server of the MPLS
........................................................................................................................................................................................................................
3
Click Select to select the MPLS Port as shown in
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
5-73.
Tunnel Segment.
Figure 5-74.
Create transit tunnel
5 - 9 9