Alcatel-Lucent 1850 User Provisioning Manual page 543

Appendix
............................................................................................................................................................................................................................................................
Command
ENT-GBE
ENT-L2ENCAP-
PROF
ENT-MAP
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Description
Automatic In-Service Threshold,
specifies how long an input signal
must be present on the facility
without a failure condition before
the system transitions the facility
into the In-Service state.
Flow control mode selection
Negotiation mode with link
partner. This parameter enables
flow control and the direction of
flow control.
The Alarm Severity Assignment
Profile (ASAP) name to use with
this facility
The PM Threshold Crossing Alert
(TCA) profile name to use with
this facility
Primary State, specifies the
primary state to which the facility
is set.
Secondary State, specifies the
secondary state to which the
facility is set.
Create a L2 Encapsulation Profile
user defined.
Internet Protocol address, it is the
IP address (in the format nnn-nnn-
nnn-nnn) of the remote NE added
to the mapping table entry. The
address 0-0-0-0 is not allowed.
IP Port, it is the associated IP port
of the TL1 raw-mode server on
the remote NE to be added to the
mapping table.
Parameter defaults
Parameter Default
AINSTH 08-00
FLOWCON ASYMMETRIC-
T PAUSE
NEGOTN AUTO
ALMPROF <currently
designated default
profile>
TCAPROF <currently
designated default
profile>
PST IS
SST <NULL>
TID Entry Required
IPADDR Entry Required.
PORT 3082
6 - 1 4 9