Evpl Service Parameters - Alcatel-Lucent 1850 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................
Figure 5-90 EVPL service - create
........................................................................................................................................................................................................................
5
Table 5-47, "EVPL service parameters" (p. 5-117)

EVPL service parameters.

Table 5-47 EVPL service parameters
Parameter
Topology
Transport link (PW)
Ingress
Service Label
VLAN swap
ETH UNI to TMPLS NNI EVC termination
Traffic descriptor
Topology classifier
Ethernet type
Layer 2 control frames (0x)
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
provides the description of Create
Description
Specifies the topology to establish the service.
The values are: UNI-NNI and NNI-UNI
Specifies the input port
Specifies the name or label for the new service
The values are enable or disable
Specifies the operation mode
Specifies the classifier for the selected topology
Specifies the ethernet type for the service
Specifies the protocol frames that can accede the
port
Create EVPL service
5 - 1 1 7