Evpl Service - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
PW AID Filter - Enable the check box to enter the pseudowire access identifier to be
•
entered in the entry field.
The Create Head/Tail Pseudowire allows to create a new Pseudowire. See
head/tail pseudowire" (p. 5-108).
The Create Transit Pseudowire is to create a new Transit Pseudowire. See
pseudowire" (p. 5-111).
Ethernet service XC
The Ethernet Service XC contains the following sub-menu option:
EVPL - A point-to-point connectivity service
•
EVPLAN - A point-to-multipoint connectivity service
•
EVPL
The EVPL displays the following as shown in
Figure 3-18 EVPL service
The EVPL Service tab provides the following parameters:
XC Id - Specifies the cross-connection Id for the selected EVPL service
•
From - Specifies the source to establish EVPL service
•
From user label - Specifies the user label for the source
•
To - specifies the target to establish EVPL service
•
To user label - Specifies the user label for the target
•
Topology - Specifies the topology to establish the service
•
Click Create to configure a new EVPL service. See
EVPLAN
The EVPLAN service contains the following as shown in
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Figure 3-18.
"Create EVPL service" (p. 5-116).
Figure 3-19.
(T)-MPLS menu
"Create
"Create transit
3 - 2 9