Alcatel-Lucent 1850 User Provisioning Manual page 307

Procedures
............................................................................................................................................................................................................................................................
Parameter
OSI Protocol
DCC Mode
Internet Protocol
Channel used by
DCC Channel
........................................................................................................................................................................................................................
4
Click Save to store all the settings and click Create to configure a new DCC Channel as
shown in
Figure 5-31 DCC channel - filter by
........................................................................................................................................................................................................................
5
Select the AID type from the combo-box to filter DCC Channel that the user wants to
configure.
........................................................................................................................................................................................................................
6
Click Search to filter the DCC Channel as shown in
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Figure 5-31.
Description
Specifies if the OSI protocol runs on the addressed DCC or
not. The values are:
ENABLE
•
DISABLE
•
Specifies the DCC Mode for the NE interface. The default
value is TERMINATED
Specifies the Internet Protocol for the network interface
Specifies the DCC channel used by the NE Interface
Specifies the reference of DCC Channel. The values are:
LINE
•
SECTION
•
Figure
Create DCC Channel
5-32.
5 - 4 3