Alcatel-Lucent 1850 User Provisioning Manual page 364

Procedures
............................................................................................................................................................................................................................................................
Figure 5-74 MPLS port - select
........................................................................................................................................................................................................................
4
Select the radio button to choose the MPLS Port Access Identifier and click Apply &
Exit.
........................................................................................................................................................................................................................
5
Click Cancel to return to the previous panel.
– Direction - Specifies the Tunnel Segment Direction (BIDIR or UNIDIRIN or
– User Name - Specifies the Tunnel Segment User name
– In Label - Specifies the expected Label for incoming segment associated to Sink
– Out Label - Specifies the transmitted Label for outgoing segment associated to
– PHB Profile - Specifies the AID of PHB Profile resource
........................................................................................................................................................................................................................
6
Click Select to choose the PHB Profile as shown in
............................................................................................................................................................................................................................................................
5 - 10 0
UNIDIROUT)
Tunnel Segment. This parameter is not relevant if DIR=UNIDIROUT. The label
value must be unique in the system and in the range {1024-1048575}
Source Tunnel Segment. This parameter is not relevant if DIR=UNIDIRIN. The
label value must be unique on MPLS port basis and in the range {1024-1048575}
Create transit tunnel
Figure 5-75.
Issue 1 February 2009
8DG08763KAAA