Enter Channel Parameters - Alcatel-Lucent 1850 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................
Table 5-20 Enter channel parameters
Parameter
DCC CHNL
From
To
........................................................................................................................................................................................................................
4
Click Select to choose source and the destination to configure a cross-connection as
shown in
Figure 5-36 DCC_SELECTION window
........................................................................................................................................................................................................................
5
Click the radio button to select the DCC Channel from the table and click Select to
confirm the selection and return to the previous panel as shown in
........................................................................................................................................................................................................................
6
Click Save to store all the settings and return to the previous page.
............................................................................................................................................................................................................................................................
8DG08763KAAA
Issue 1 February 2009
Figure 5-36.
Description
Specifies the reference of the DCC Channel.
The values are:
LINE
•
SECTION
•
Specifies the source for the cross-connection
Specifies the destination for the cross-
connection
Create XC Overhead
Figure 5-35.
5 - 4 7